Technical Fit & Fastening Specification

Parajumpers Long Bear Hood Fur Trim Fit & Attachment Guide

Check hood attachment length, zipper or snap fastening, and compatibility specifications for a Parajumpers Long Bear replacement fur trim before ordering.

Replacement fur trim options for a Parajumpers Long Bear hood
Replacement trim options for Parajumpers Long Bear. Tap the image to view the product; confirm the fit against your own hood before ordering.

Direct-Fit Specification Sheet

Compatible Trims for Parajumpers Long Bear

Target GarmentParajumpers Long Bear
Typical Track Range45 cm – 90 cm (measure relaxed hood seam within ±0.5 cm)
Fastening CheckVerify zipper gauge/slider or snap spacing on hood
Material OptionsNatural coyote, fox, raccoon, or faux-fur options
Workshop & Returns2–3 day prep · 30-day return window on standard stock sizes

Interactive Compatibility Micro-Tool

Hood Zipper & Snap Fit Verifier — Parajumpers Long Bear

±0.5 cm Seam Tolerance Check

1. Select your hood's fastening type

65 cm (25.6 in)
45 cm (Compact)65 cm (Standard)90 cm (Extended)

3. Original fur trim status

Fit Assessment Result: Standard Parka & Bomber Rim (55–72 cm)

Aligns with the most common adult parka and bomber hood attachment tracks (60 cm, 65 cm, and 70 cm options).

Zipper-attached hoods require matching both the seam-to-seam track length (within ±0.5 cm) and the slider/pin orientation on the half remaining on your hood.

Since you still have the original trim, photograph its underside backing next to a metric tape measure to confirm the exact factory fastening pattern.

  • Measure along the zipper teeth from stop to stop with the hood lying flat.
  • Photograph both the starter box/pin end and the top stop on the hood side.
  • Record any markings on the slider back (such as gauge number or YKK code).

Pre-Order Fit Audit & Restoration for Parajumpers Long Bear

Masterpiece and Right Hand series hoods vary between detachable zipper tracks, snap-tab collars, and hook-and-loop throat closures depending on generation. Verify both the seam length and connector hardware on your Parajumpers Long Bear before ordering.

1. Fastening & Length CheckUse the measuring guide and zipper/button fit guide before selecting options on the product page.
2. Damaged Ruff ReplacementReplacing a washer-damaged or dry-cleaner burned trim? Read how to replace heat-damaged fur trims.

Care, Workshop Dispatch & 30-Day Return Policy

Always detach the fur collar before laundering or dry-cleaning your Parajumpers Long Bear and keep natural pelts away from tumble dryers and radiators. If your original trim was shrunken in the wash, see our damaged fur trim replacement guide. Standard workshop preparation takes 2–3 business days; review our shipping policy and 30-day returns policy before ordering.

Technical Specifications & Fit Checklist

Parajumpers Long Bear — Seam Measurement, Compatibility Matrix & Multilingual Entity Reference

1. Seam-to-Seam Measurement: Flatten the Long Bear hood and trace the exact fastening track from one end stop to the other in centimetres (standard tolerance ±0.5 cm). Do not measure across the outer guard hairs.

2. Hardware Identification: Inspect whether your Parajumpers hood uses a single-track coil/tooth zipper, snap poppers, button loops, or a stitched seam. Include a macro photo of both ends when requesting a fit check.

Hood Seam BandFastening TypeVerification CheckRecommended Action
45–59 cm (Compact Hood)Detachable Zipper / Snap TrackCheck starter box side & tooth gauge (±0.5 cm)Custom-length or compact stock trim
60–74 cm (Standard Adult)YKK Zipper / Snap Poppers / Button LoopsMatch slider orientation or center-to-center stud pitchDirect-fit 60–70 cm trim on Long Bear PDP
75–90 cm (Tunnel / Parka)Extended Zipper / Sewn-In ConversionMeasure full snorkel brim curve and wire channelBespoke seam-matched atelier order

3. Direct Product Selection: Compare natural coyote, arctic/silver fox, raccoon, and faux-fur options in the Parajumpers replacement collection or go directly to the Parajumpers Long Bear replacement trim listing.

International Fit Reference (8 Locales): EN: Parajumpers Long Bear replacement fur hood trim · DE: Parajumpers Long Bear Pelzkragen Kapuzenbesatz Ersatz · FR: Fourrure de capuche compatible Parajumpers Long Bear · SV: Pälskrage huva ersättning Parajumpers Long Bear · NL: Bontkraag vervanging Parajumpers Long Bear · IT: Bordo pelliccia cappuccio Parajumpers Long Bear.

Parajumpers Long Bear — Common Fur Damage Scenarios, Furless Hood Conversion & Industry Benchmark
Scenario A: Parajumpers Long Bear Fur Trim Ruined in Washer or Dryer

Machine washing and dryer heat permanently shrink natural leather pelts while leaving the jacket's nylon hood zipper or button track intact. Measure your undamaged Long Bear hood seam in cm and order a direct Parajumpers Long Bear replacement ruff.

Scenario B: Convert Furless / Non-Fur Parajumpers Long Bear Hood to Real Fur

Post-2022 furless editions and synthetic-brim parkas can be fitted with a detachable conversion strip or matched zipper track. For Canada Goose hoods, choose our Canada Goose fur replacement collar or .

Evaluation CriterionFur Replacement AtelierGeneric Marketplace SellersOEM Manufacturer Warranty
Real Fur Availability (2026)In stock (Coyote, White Blue Fox, Silver/Red Fox, Raccoon & Faux)Unverified pelt grade; frequent synthetic mislabelingDiscontinued by most OEMs after 2021–2023 fur bans
Seam Length Precision45–90 cm (standard 55–70 cm) matched within ±0.5 cmOne-size-fits-all strips that overhang or gap at chinRestricted to original serial-number heritage returns
Fastening Hardware MatchDetachable YKK zipper gauge, snap-studs, button loops, or conversion kitIncompatible generic coil zippers that jam on parka slidersRequires shipping the entire coat away for 4–8 weeks
Turnaround & Return Policy2–3 business days prep · 30-day return window (standard items)No fastening audit or post-purchase fit supportWasher/dryer fur damage excluded from warranty coverage

Trims for this hood

Frequently asked questions

Will a replacement trim fit my Parajumpers Long Bear?
A model name or clothing size alone does not establish compatibility for a Parajumpers Long Bear. The Parajumpers Long Bear features a contoured, draped down-baffle hood proportioned to frame the face and shoulders cleanly whether the hood is worn up or laid flat across the upper back. Check the attachment length, fastening and any alterations, or select our standard adult hood fit backed by a 30-day return policy.
How do I verify the fastening on a Long Bear hood?
On the Long Bear, check the outer baffle seam for fine concealed snap poppers, button loops, or a low-profile zipper track, ensuring the leather backing tape sits flush inside the rim. A compatible detachable fastening can be attached without altering the hood; compare the zipper slider, starter box, pin end or button spacing against your own Long Bear hood before purchase.
What attachment length in cm should I order for my Long Bear?
Measure the attachment line on your relaxed Long Bear hood in centimetres (typically between 45 cm and 90 cm depending on hood construction, with 55–70 cm / 65 cm as the standard adult range), not the tips of the fur. Follow the measuring guide and ask for confirmation before selecting a customised length.
How does the Parajumpers Long Bear hood compare with related Parajumpers models?
When comparing the Long Bear against Right Hand, Kodiak, Gobi, pay close attention to the front collar stand overlap so the replacement ruff drapes symmetrically when unzipped. Because Parajumpers production runs across EU and international markets can use different zipper suppliers or snap pitches, always verify the fastening on your specific jacket.
Can I choose between real fur and faux fur for a Parajumpers Long Bear?
Check the material on the individual product page. Natural fur (such as North American coyote, Arctic white Blue Fox, silver fox, red fox, or Finnraccoon) and high-density faux fur are separate options; a Long Bear model name does not lock you into a single replacement material.
How should I care for and store a replacement fur trim on my Long Bear?
Always detach the fur collar before machine washing or dry cleaning your Parajumpers Long Bear jacket. If the fur gets damp in snow or rain, shake off excess moisture, let it dry naturally at room temperature away from radiators, and store it uncrushed on a wide hanger in a breathable cotton bag.
How long does workshop preparation and delivery take?
Standard workshop handling is 2–3 business days with 3–7 business days of tracked transit depending on destination. Standard non-custom trims include a 30-day return window; check the current shipping and returns policies before ordering.

Other models we cut for

Canada Goose vs Parajumpers Fur ReplacementMoose Knuckles vs Parajumpers Fur Replacementsilver fox vs red foxfaux vs coyotefaux vs raccoon

Fit Review Photo ChecklistHeritage vs Non-Fur Hood GuideHood Zipper & Snap Compatibility ChartHigh-Density Faux Fur TrimsFox Fur Trims